Шариковая каретка устойчивая к коррозии с покрытием Resist CR Bosch Rexroth KWC-035-BNS-C1-H-2 [R167131360]

Описание

Ball runner block, BNS, size 35, Resist CR \u2013 coating, accuracy high, low preload, without ball chain Product Description The ball runner block is highly precise and corrosion-resistant thanks to its Resist CR coating. Additionally, it is characterized by the following product features: Size 35 Format BNS: Width = wide, length = normal, height = standard Runner block body made of unalloyed steel CS, matte-silver, hard chrome plated Preload class C1: Low preload Accuracy class H: High Without ball chain Preserved Without initial lubrication Without attachment element, left (front reference edge) Without attachment element, right (front reference edge) 45° angular lube nipples loosely attached. Runner block body in standard version Overall length of the runner block = 142.0 mm Interchangeability: The runner block and the guide rails can be combined with each other with every accuracy. Area of application: For high torsional moments on rails The same high load ratings in all four main directions of loading Excellent dynamic characteristics Low noise level and optimum travel behavior High torque load capacity Attachments on the ball runner block can be mounted from above and below Linear guideway with low clearance or moderate preload End-face fastening thread for all attachments Optimized entry-zone geometry and high number of balls minimize variation in elastic deflection Can be used on all BNS ball guide rails Very high torsional moment load capacity and very high torsion resistance – therefore primarily used as an individual guide Maximum system rigidity due to preloaded O-arrangement Wide range of accessories Ball runner block body or ball guide rail made of steel with corrosion resistant coating, matte-silver finish, hard chrome plated Improved rigidity under lift-off and side loading conditions due to two additional mounting screw holes at the center of the ball runner block Technical Specs Product attributes Version Ball rail system Nominal size [mm] 35/90 Format BNS - wide, normal, standard height Model Wide ball runner block Material (profiled rail systems) Hard chrome plated Preload class C1 - Low preload Accuracy class H - Highly accurate Seal SS - Standard seal Ball chain Without ball chain (standard) Self-aligning for compensation of misalignments Without self-alignment Width of runner block [mm] 162 Length of runner block [mm] 142 Height of runner block [mm] 42.5 Height runner block with guide rail [mm] 50 Lubrication With preservation and without initial lubrication Maximum acceleration rate amax [m/s²] 250 Note: Max. acceleration amax If Fcomb◡> 2.8 • Fpr : amax = 50 m/s2 Maximum permissible linear speed vmax [m/s] 3 Permissible ambient temperature (min. ... max.) -10 °C ... +80 °C Note: permissible ambient temperature (min. ... max.) 100 °C admissible for short time. For operation at negative temperatures, please consult us. Friction coefficient μ 0.002 ... 0.003 Note: friction coefficient μ Without friction of seal Weight [kg] 3.84 Dynamic load capacity C50 [N] 89100 Note: dynamic load capacity C50 Dynamic load capacity and load moments based on a travel of 50,000 m. Dynamic load capacity C100 [N] 70700 Note: dynamic load capacity C100 Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. Static load capacity C0 [N] 126000 Dynamic torsional moment load capacity Mt50 [Nm] 4410 Note: Dynamic torsional moment load capacity Mt50 Dynamic load capacity and load moments based on a travel of 50,000 m. Dynamic torsional moment load capacity Mt100 [Nm] 3500 Note: Dynamic torsional moment load capacity Mt100 Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. Static torsional moment load capacity Mt0 [Nm] 6240 Dynamic longitudinal moment load capacity ML50 [Nm] 1850 Note: Dynamic longitudinal moment load capacity ML50 Dynamic load capacity and load moments based on a travel of 50,000 m. Dynamic longitudinal moment load capacity ML100 [Nm] 1470 Note: Dynamic longitudinal moment load capacity ML100 Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. Static longitudinal moment load capacity ML0 [Nm] 2620 Pitch T guide rail [mm] 80 Dimension A (profiled rail systems) [mm] 162 Dimension A1 (profiled rail systems) [mm] 81 Dimension A2 (profiled rail systems) [mm] 90 Dimension A3 (profiled rail systems) [mm] 36 Dimension B (profiled rail systems) [mm] 142 Dimension B1 [mm] 113.6 Dimension E1 [mm] 144 Dimension E2 (profiled rail systems) [mm] 80 Dimension E8 (profiled rail systems) [mm] 79 Dimension E8.1 (profiled rail systems) [mm] 116 Dimension E9 (profiled rail systems) [mm] 6.8 Dimension E9.1 (profiled rail systems) [mm] 29.9 Dimension H [mm] 50 Dimension H1 (profiled rail systems) [mm] 42.5 Dimension H2 (profiled rail systems) [mm] 31.85 Dimension K1 (profiled rail systems) [mm] 22.8 Dimension K2 (profiled rail systems) [mm] 24.8 Dimension K3 (profiled rail systems) [mm] 9 Dimension K4 (profiled rail systems) [mm] 9 Dimension N1 (profiled rail systems) [mm] 14 Dimension N2 (profiled rail systems) [mm] 12 Dimension N6 (profiled rail systems) [mm] 20.5 Dimension N6 tolerance (profiled rail systems) [mm] ±0.5 Dimension S1 (profiled rail systems) [mm] 8.4 Dimension S2 (profiled rail systems) M10 Dimension S5 (profiled rail system) [mm] 9 Dimension S9 M3x5 mm Dimension S9 thread diameter (profiled rail systems) M3 Dimension S9 lead [mm] 5 Dimension T1 min [mm] 12 Dimension V1 [mm] 8