BRAKING RESISTOR HLR01.2N-0K06-N100R-E-003-NNNN [R911338512]

Описание

Additonal Module Product Description For the use of HCS03 converters in regenerative operation, brake resistors with a particularly compact design are available for selection for different power consumptions. The brake resistor is mounted directly above the converter. The space-saving arrangement simplifies the installation. At the same time, flow of exhaust air from the converter provides effective cooling. The robust design of the resistor elements allows an extreme pulse load with high dielectric strength. The resistor elements used are non-flammable and fully enclosed to protect against harmful environmental influences. The use of a reinforced brake resistor is always required if high regenerative power occurs over a longer period. This is the case, for example, when lowering large loads or when braking from high inertial mass. Depending on the required braking performance for each converter, compact brake resistors are available in varying levels of performance and design. Suitable for ctrlX DRIVE dual-axis converters XCD Suitable for ctrlX DRIVE feeding supply units XVE Suitable for ctrlX DRIVE single-axis converters XCS Suitable for ctrlX DRIVE regenerative supply units XVR Suitable for IndraDrive C, HCS02 Suitable for IndraDrive C, HCS03 Suitable for IndraDrive ML, HMU05 Technical Specs Product attributes EPLAN https://ecad-configuration.boschrexroth.com/?rootpartnr=BOS.HLR01.2N-0K06-N100R-E-003-NNNN**&downloads=true Continuous power [kW] 0.06 Width [mm] 49.4 Height [mm] 243 Depth [mm] 35 International protection code IP54 Permanent braking power (braking resistor) [kW] 0.06 Maximum braking power (braking resistor) [kW] 1.38 DC bus voltage DC 300 V Weight [kg] 0.64