ANALOG OUTPUT MODULE XI412204 [R911406116]

Описание

ctrlX I/O 4-channel analog output terminal (0 to 10 V, 16 bit) Product Description The analog output terminal XI412204 creates output signals in the range from 0 to 10 V in a ctrlX I\/O station. The output signal is output galvanically isolated from the system level with a resolution of 16 bits. The four output channels have a common mass potential. The output stages are fed via the 24 V supply from UP. The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module. Technical Specs Product attributes EPLAN https://ecad-configuration.boschrexroth.com/?rootpartnr=BOS.XI412204**&downloads=true Connection type Push-in Connectivity technology 2-wire technique bipolar, shielded, twisted in pairs Number of channels 4 Max. output current per channel [A] 0.002 Voltage supply UP via jumper contacts Width [mm] 12 Height [mm] 105 Depth [mm] 99 International protection code IP20 Protection class III Backplane-Bus Standard-EtherCAT über LVDS Process data update [µs] 250 Resolution D/A 16 Bit EMC resistance EN 61000-6-2 and EN 61000-6-4Class A - Industrial area Accuracy typ. ± 0.1% of the end value of the measuring range (MBE)max. ± 0.25% of MBE (depending on load, aging and temperature drift) Bit width, output data in the process data image 8 bytes (can be set channel-granularly) Bit width, input data in the process data image (including fill bits) 10 bytes in the standard representation2 bytes in the "compact" representation(Can be set channel-granularly) Maximum power dissipation in the module [W] 2.45 A/D conversion time 290 µs Post-assembly position Vertical, on a horizontal support rail Electrical isolation 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) Current requirement UL max. 40 mA Current requirement Up max. 55 mA Net current module outputs [A] 0.008 Nominal voltage (UL/UP) DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) Overvoltage category 2 Output signal 0-10 V Output load voltage [kΩ] ≥5 Signal type bipolar Conductor cross-section rigid: 0.2-1.5 mm²,Flexible: 0.2-1.5 mm²,AWG: 24 ... 16 Overload protection Yes Permissible air humidity (storage) [%] 10-95 Permissible air humidity (transport) [%] 10-95 Ambient temperature (storage and transport) [°C] -40-70 Ambient temperature during operation Up to 2000 m: -25°C to +45°C,2,000 m to 3,000 m: -25 °C to +40 °C Maximum operating altitude [m] 3000 Contamination level 2, no condensation Weight [kg] 0.13