DIGITAL OUTPUT MODULE XI213204 [R911417209]

Описание

ctrlX I/O 4-channel digital output terminal (24 VDC, 2.0 A), 2-wire Product Description The digital output module XI213204 is used to output binary 24 V control signals with a maximum current of 2 A in a ctrlX I\/O station. The module has four channels in a 2-wire technique. The signal state is shown at the channel LED on the removable peripheral connector. The digital outputs are fed via the 24 V supply from UP. The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module. Technical Specs Product attributes EPLAN https://ecad-configuration.boschrexroth.com/?rootpartnr=BOS.XI213204**&downloads=true Connection type Push-in Connectivity technology 2-wire technique Number of channels 4 Max. output current per channel [A] 2 Width [mm] 12 Height [mm] 105 Depth [mm] 99 International protection code IP20 Protection class III Backplane-Bus Standard-EtherCAT über LVDS EMC resistance EN 61000-6-2 and EN 61000-6-4 Bit width, output data in the process data image 1 byte Maximum current fed into all GND Output Pins of the module [A] 8 Maximum current fed into one GND Output Pin [A] 2 Inductive switch-off energy Max. 150 mJ Nominal load [Ohm] 12 Channel LEDs Per channel Post-assembly position Vertical, on a horizontal support rail Electrical isolation 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) Rise time (TRise) Without load: 16,4 µs on the digital input; 17,3 µs at 240 Ohm, 100 mA; Ohmic nominal load: 17,4 µs at 48 Ohm, 500mA Fall time (TFALL) Without load: 1,4 µs on the digital input; 45,3 µs at 240 Ohm, 100 mA; Ohmic nominal load: 22,4 µs at 12 Ohm, 2000mA Feedback voltage resistance Not resistant to feedback, external measures required Current requirement UL 22 mA Current requirement Up 15 mA + load Net current module outputs [A] 8 Nominal voltage (UL/UP) DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) Overvoltage category 2 Nominal output voltage [V DC] 24 Conductor cross-section rigid: 0.2-1.5 mm²,Flexible: 0.2-1.5 mm²,AWG: 24 ... 16 Overload protection Granular switch-off with automatic restart Permissible air humidity (storage) [%] 10-95 Permissible air humidity (transport) [%] 10-95 Ambient temperature (storage and transport) [°C] -40-70 Ambient temperature during operation Up to 2,000 m: -25 °C to +55 °C,2,000 m to 3,000 m: -25 °C to +50 °C,3,000 m to 4,000 m: -25 °C to +45 °C,4,000 m to 5,000 m: -25 °C to +40 °C Maximum operating altitude [m] 5000 Contamination level 2, no condensation Weight [kg] 0.12