Промышленные компоненты для предприятий России
BBREZGIndustrial Group
COMMUNICATION MODULE XI522001 [R911421016]
REXROTH

COMMUNICATION MODULE XI522001 [R911421016]

Артикул  /  R911421016
Коммерческое предложение

Сообщим стоимость, доступное количество и срок поставки. Если точной позиции нет, предложим проверенный аналог.

  • Проверка производителя
  • Безналичная оплата
  • Доставка по России
  • Подбор аналога
О позиции

Описание

ctrlX I/O 1-channel RS485/RS422 communication terminal Product Description The XI522001 communication terminal allows to connect devices with an RS485 or RS422 interface in a ctrlX I\/O station. The serial communication works independently of the superordinate bus system in full- or half-duplex mode with up to 250 kBaud. Receive buffer and transmit buffer, each with 511 bytes, enable the rapid transmission and reception of larger cohesive data. The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module. Technical Specs Product attributes EPLAN https://ecad-configuration.boschrexroth.com/?rootpartnr=BOS.XI522001**&downloads=true Connection type Push-in Connectivity technology 2-wire technique, shielded, twisted in pairs Number of channels 1 Width [mm] 12 Height [mm] 105 Depth [mm] 99 International protection code IP20 Protection class III Backplane-Bus Standard-EtherCAT über LVDS EMC resistance EN 61000-6-2 and EN 61000-6-4 Bit width, output data in the process data image 32 Bytes Bit width, input data in the process data image (including fill bits) 36 bytes Maximum power dissipation in the module [W] 1.32 Fuse protection (UOUT24 V) Auto switch-off at overload Channel LEDs Display data transfer for RX and TX Post-assembly position Vertical, on a horizontal support rail Electrical isolation 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) Current requirement UL 40 mA Current requirement Up 20 mA + load Max. current up per terminal point [A] 0.5 Max. net current Up module [A] 0.5 Nominal voltage (UL/UP) DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) Overvoltage category 2 Signal type ANSI/TIA/EIA-485-A & ANSI/TIA/EIA-422-B Conductor cross-section rigid: 0.2-1.5 mm²,Flexible: 0.2-1.5 mm²,AWG: 24 ... 16 Permissible air humidity (storage) [%] 10-95 Permissible air humidity (transport) [%] 10-95 Ambient temperature (storage and transport) [°C] -40-70 Ambient temperature during operation Up to 2,000 m: -25 °C to +55 °C,2,000 m to 3,000 m: -25 °C to +50 °C,3,000 m to 4,000 m: -25 °C to +45 °C,4,000 m to 5,000 m: -25 °C to +40 °C Maximum operating altitude [m] 5000 Contamination level 2, no condensation Weight [kg] 0.11