INTERFACE MODULE XI112108 [R912009441]

Описание

ctrlX I/O 8-channel digital input and output terminal (24 VDC, 3 ms input filter), 1-wire Product Description The digital input and output module XI112108 is used to detect and output binary 24 V control signals in a ctrlX I\/O station. The module is designed with 8 input channels and 8 output channels, each in 1-wire technique. The signal state is shown at the channel LED on the removable peripheral connector. The peripheral supply voltage UP supplies the digital outputs. The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module. Technical Specs Product attributes EPLAN https://ecad-configuration.boschrexroth.com/?rootpartnr=BOS.XI112108**&downloads=true Connection type Push-in Connectivity technology 1-wire technique Number of channels 16 Max. output current per channel [A] 0.5 Width [mm] 12 Height [mm] 105 Depth [mm] 99 International protection code IP20 Protection class III Backplane-Bus Standard-EtherCAT über LVDS EMC resistance EN 61000-6-2 and EN 61000-6-4 Bit width, output data in the process data image 1 byte Bit width, input data in the process data image (including fill bits) 1 byte Maximum power dissipation in the module [W] 1.8 Input filter 3 ms Inductive switch-off energy Max. 150 mJ Inverse polarity protection up to [V] 30 Nominal load [Ohm] 48 Channel LEDs Per channel Post-assembly position Vertical, on a horizontal support rail Electrical isolation 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) Feedback voltage resistance Not resistant to feedback, external measures required Current requirement UL 30 mA Current requirement Up 50 mA + load Net current module outputs [A] 4 Input current [mA] 2.4 Signal voltage "0" [V] -3-5 Signal voltage "1" [V] 11-30 Nominal voltage (UL/UP) DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) Overvoltage category 2 Nominal output voltage [V DC] 24 Nominal input voltage [V DC] 24 Conductor cross-section rigid: 0.2-1.5 mm²,Flexible: 0.2-1.5 mm²,AWG: 24 ... 16 Overload protection Granular switch-off with automatic restart Permissible air humidity (storage) [%] 10-95 Permissible air humidity (transport) [%] 10-95 Ambient temperature (storage and transport) [°C] -40-70 Ambient temperature during operation Up to 2,000 m: -25 °C to +55 °C,2,000 m to 3,000 m: -25 °C to +50 °C,3,000 m to 4,000 m: -25 °C to +45 °C,4,000 m to 5,000 m: -25 °C to +40 °C Maximum operating altitude [m] 5000 Contamination level 2, no condensation Weight [kg] 0.12