Линейная втулка Bosch Rexroth eLINE KBC-8-DD-RT-G [R065826244]

Описание

eLINE LB, 8, with two seals, reduced, greased Product Description Linear bushing eLINE Compact (C) Shaft diameter d = 8 With two seals Radial clearance: Reduced Version: Standard Greased Initial lubrication with Dynalub 510 Low-cost linear bushing for general requirements Reduced radial clearance for applications where minimal-clearance bearings with an H7 bore are desired Small outer dimensions and highly compact construction Low-cost linear bushing for general requirements Small outer dimensions and highly compact construction High dynamic load rating and long service life due to hardened segmental load-bearing plates with ball conformity in the running track Reduced radial clearance for applications where minimal-clearance bearings with an H7 bore are desired Initial lubrication with Dynalub 510 Simple mounting: Just press on – no additional retention needed High travel speed (5 m\/s) Integrated wiper seals, external seals or no wiper seals Integrated metal retainer about 0.1 mm larger than outer diameter (shaft diameters 12 to 50) for secure fit in housing bore Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. POM ball retainer Balls made of rolling bearing steel Technical Specs Product attributes Shaft diameter d [mm] 8 Version Standard Format of linear bushings – Closed Series Compact (eLINE) Seal 2 integrated wiper seals Lubrication Greased Maximum dynamic load capacity Cmax [N] 580 Maximum acceleration rate amax [m/s²] 150 Maximum permissible linear speed vmax [m/s] 5 Radial clearance reduced radial clearance Length of linear bushing [mm] 24 Outer diameter D [mm] 15 Permissible ambient temperature (min. ... max.) -10 °C ... +80 °C Weight [kg] 0.01 Footnote maximum dynamic load capacity Cmax The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. Footnote maximum static load capacity C0max null Footnote minimum dynamic load capacity Cmin The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. Footnote minimum static load capacity C0min null Footnote friction force FR Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. Breakaway force [N] 0.8 Type Linear bushing Dimension C [mm] 24 Dimension D [mm] 15 Dimension d [mm] 8