Линейный комплект Bosch Rexroth LSATE-A-30-DD [R103263020]

Описание

Linear set (aluminum), TE-A-30, with two seals Product Description Linear set (aluminum) Tandem, adjustable With super LB A Shaft diameter d = 30 With two seals Version: Standard Lightweight precision tandem housing (aluminum) Two super linear bushings A Reference edge External seals Relubricatable Also available as linear motion slide. Technical Specs Product attributes Shaft diameter d [mm] 30 Format of linear bushings TE - Tandem, adjustable Series Super A (with self-alignment feature) Dynamic load capacity C [N] 9520 Note: dynamic load capacity C Load capacity when both linear bushings are under equal load. The load capacities apply for the main direction of loading. If the direction of loading is not the main direction of loading, the load capacities must be multiplied by the following facto* Maximum acceleration rate amax [m/s²] 150 Maximum permissible linear speed vmax [m/s] 3 Note: maximum permissible speed vmax Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. Dynamic longitudinal moment load capacity ML [Nm] 289 Radial clearance Clamped to h5 shaft (lower limit) and set to zero-clearance before delivery Outer diameter D [mm] 47 Permissible ambient temperature (min. ... max.) -10 °C ... +80 °C Weight [kg] 1.92 Static load capacity C0 [N] 7140 Note: static load capacity C0 Load capacity when both linear bushings are under equal load. The load capacities apply for the main direction of loading. If the direction of loading is not the main direction of loading, the load capacities must be multiplied by the following facto* Static longitudinal moment load capacity ML0 [Nm] 206 Footnote friction force FR Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. Breakaway force [N] 6 Type Linear set Dimension B1 [mm] 87 Dimension D [mm] 47 Dimension E3 (profiled rail systems) [mm] 106 Dimension E3 tolerance [mm] ±0.15 Dimension E4 [mm] 68 Dimension E5 [mm] 52 Dimension E6 [mm] 72 Dimension H [mm] 35 Dimension H1 (profiled rail systems) [mm] 70 Dimension H3 [mm] 16 Dimension H4 [mm] 22 Dimension L 152 Dimension M [mm] 43.5 Dimension N2 (profiled rail systems) [mm] 34 Dimension N3 (profiled rail systems) [mm] 22 Dimension S2 [mm] 8.4 Dimension S4 [mm] 6 Dimension SW [mm] 5 Dimension V [mm] 8