Стандартная линейная втулка Bosch Rexroth KBM-E-40-D [R061104010]

Описание

Standard LB, adjustable, 40, with one seal Product Description "standard linear bushing Standard (metal) Adjustable Shaft diameter d = 40 With one seal Version: Standard" Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life Seal-free and with steel ball retainers for temperatures well above 80°C or under vacuum Radial clearance adjustable Integrated wiper seals for high contamination For use in woodworking, foundries, cement plants Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. No wiper seals, come with integrated steel retaining rings; higher temperatures allowed with shaft diameters 12 and higher Hardened and ground outer sleeve Steel ball retainer (shaft diameters 5 and 8 with plastic retainer made of PA) Balls made of rolling bearing steel Technical Specs Product attributes Shaft diameter d [mm] 40 Version Standard Format of linear bushings E - Adjustable Series Standard (metal) Seal 1 integrated wiper seal Lubrication Not lubricated Maximum dynamic load capacity Cmax [N] 5480 Maximum acceleration rate amax [m/s²] 100 Maximum permissible linear speed vmax [m/s] 2.5 Length of linear bushing [mm] 80 Outer diameter D [mm] 62 Permissible ambient temperature (min. ... max.) -10 °C ... +80 °C Note: permissible ambient temperature (min. ... max.) Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. Friction coefficient μ 0.001 ... 0.004 Note: friction coefficient μ Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. Weight [kg] 0.6 Footnote breakaway force One wiper seal: Multiply value with factor 0.5 Footnote maximum dynamic load capacity Cmax The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. Footnote maximum static load capacity C0max null Footnote minimum dynamic load capacity Cmin The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. Footnote minimum static load capacity C0min null Footnote friction force FR One wiper seal: Multiply value with factor 0.5 Breakaway force [N] 24 Type Linear bushing Dimension C h12 [mm] 80 Dimension C1 H13 [mm] 60.3 Dimension C2 [mm] 2.15 Dimension D [mm] 62 Dimension D1 [mm] 58 Dimension E [mm] 2