Стандартная линейная втулка Bosch Rexroth KBMT-8-DD [R065050800]

Описание

Standard LB, tandem, 8, with two seals Product Description standard linear bushing Standard (metal) Tandem Shaft diameter d = 8 With two seals Version: Standard Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life For use in woodworking, foundries, cement plants Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. Integrated wiper seals Hardened and ground outer sleeve POM ball retainer Balls made of rolling bearing steel Technical Specs Product attributes Shaft diameter d [mm] 8 Version Standard Format of linear bushings T - Tandem Series Standard (metal) Seal 2 integrated wiper seals Lubrication Not lubricated Maximum dynamic load capacity Cmax [N] 390 Maximum acceleration rate amax [m/s²] 100 Maximum permissible linear speed vmax [m/s] 2.5 Length of linear bushing [mm] 46 Outer diameter D [mm] 16 Permissible ambient temperature (min. ... max.) -10 °C ... +80 °C Note: permissible ambient temperature (min. ... max.) Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. Weight [kg] 0.04 Static longitudinal moment load capacity ML0 [Nm] 4.5 Footnote maximum dynamic load capacity Cmax The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. Footnote maximum static load capacity C0max null Footnote minimum dynamic load capacity Cmin The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. Footnote minimum static load capacity C0min null Footnote shaft radial clearance h6 Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. Footnote friction force FR Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. Breakaway force [N] 1 Type Linear bushing Dimension C [mm] 46 Dimension C1 [mm] 33 Tolerance C1 [mm] -0.3 Dimension C2 [mm] 1.1 Dimension D [mm] 16 Dimension D1 [mm] 15.2