Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 05075 - 05185

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 05000 Cone Part Number 05075 Cup Part Number 05185 Design Unit Inch Cage Material Stamped Steel Related Assembly Number(s) 05075-90015 Dimensions d - Bore 3/4 in D - Cup Outer Diameter 1.8504 in B - Cone Width 0.5662 in C - Cup Width 0.4375 in T - Bearing Width 0.5662 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.050 in r - Cup Backface "To Clear" Radius2 0.050 in da - Cone Frontface Backing Diameter 0.93 in db - Cone Backface Backing Diameter 0.98 in Da - Cup Frontface Backing Diameter 1.69 in Db - Cup Backface Backing Diameter 1.59 in Ab - Cage-Cone Frontface Clearance 0.07 in Aa - Cage-Cone Backface Clearance -0.01 in a - Effective Center Location3 -0.16 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 1560 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 6010 lbf C0 - Static Radial Rating 5720 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 952 lbf Factors K - Factor7 1.64 e - ISO Factor8 0.36 Y - ISO Factor9 1.68 G1 - Heat Generation Factor (Roller-Raceway) 5.8 G2 - Heat Generation Factor (Rib-Roller End) 5.5 Cg - Geometry Factor10 0.0448