Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 17098 - 17244

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 17000 Cone Part Number 17098 Cup Part Number 17244 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 0.9835 in D - Cup Outer Diameter 2.4409 in B - Cone Width 0.6522 in C - Cup Width 0.5625 in T - Bearing Width 0.6300 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.06 in r - Cup Backface "To Clear" Radius2 0.06 in da - Cone Frontface Backing Diameter 1.2 in db - Cone Backface Backing Diameter 1.30 in Da - Cup Frontface Backing Diameter 2.26 in Db - Cup Backface Backing Diameter 2.13 in Ab - Cage-Cone Frontface Clearance 0.1 in Aa - Cage-Cone Backface Clearance -0.02 in a - Effective Center Location3 -0.14 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 2520 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 9720 lbf C0 - Static Radial Rating 9910 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 1650 lbf Factors K - Factor7 1.53 e - ISO Factor8 0.38 Y - ISO Factor9 1.57 G1 - Heat Generation Factor (Roller-Raceway) 11.8 G2 - Heat Generation Factor (Rib-Roller End) 7.5 Cg - Geometry Factor10 0.0579