Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 1986 - 1931

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 1900 Cone Part Number 1986 Cup Part Number 1931 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 1 in D - Cup Outer Diameter 2.3750 in B - Cone Width 0.7620 in C - Cup Width 0.6250 in T - Bearing Width 0.7813 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.050 in r - Cup Backface "To Clear" Radius2 0.050 in da - Cone Frontface Backing Diameter 1.26 in db - Cone Backface Backing Diameter 1.34 in Da - Cup Frontface Backing Diameter 2.20 in Db - Cup Backface Backing Diameter 2.05 in Ab - Cage-Cone Frontface Clearance 0.08 in Aa - Cage-Cone Backface Clearance 0 in a - Effective Center Location3 -0.23 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 2820 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 10900 lbf C0 - Static Radial Rating 11300 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 1590 lbf Factors K - Factor7 1.77 e - ISO Factor8 0.33 Y - ISO Factor9 1.82 G1 - Heat Generation Factor (Roller-Raceway) 12.5 G2 - Heat Generation Factor (Rib-Roller End) 6.33 Cg - Geometry Factor10 0.0565