Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 2382 - 2320

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 2300 Cone Part Number 2382 Cup Part Number 2320 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 1 in D - Cup Outer Diameter 2.2400 in B - Cone Width 0.9750 in C - Cup Width 0.8125 in T - Bearing Width 0.9377 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.03 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 1.18 in db - Cone Backface Backing Diameter 1.22 in Da - Cup Frontface Backing Diameter 2.11 in Db - Cup Backface Backing Diameter 1.85 in Ab - Cage-Cone Frontface Clearance 0.08 in Aa - Cage-Cone Backface Clearance -0.03 in a - Effective Center Location3 -0.37 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 3710 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 14300 lbf C0 - Static Radial Rating 13900 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 1470 lbf Factors K - Factor7 2.52 e - ISO Factor8 0.23 Y - ISO Factor9 2.59 G1 - Heat Generation Factor (Roller-Raceway) 13.8 G2 - Heat Generation Factor (Rib-Roller End) 5.9 Cg - Geometry Factor10 0.0517