Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 28985 - 28921

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 28900 Cone Part Number 28985 Cup Part Number 28921 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 2 3/8 in D - Cup Outer Diameter 3.937 in B - Cone Width 1.0000 in C - Cup Width 0.7813 in T - Bearing Width 1.0000 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.14 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 2.64 in db - Cone Backface Backing Diameter 2.87 in Da - Cup Frontface Backing Diameter 3.82 in Db - Cup Backface Backing Diameter 3.50 in Ab - Cage-Cone Frontface Clearance 0.09 in Aa - Cage-Cone Backface Clearance 0.05 in a - Effective Center Location3 -0.1 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 6180 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 23800 lbf C0 - Static Radial Rating 33500 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 4500 lbf Factors K - Factor7 1.37 e - ISO Factor8 0.43 Y - ISO Factor9 1.41 G1 - Heat Generation Factor (Roller-Raceway) 60.1 G2 - Heat Generation Factor (Rib-Roller End) 24.5 Cg - Geometry Factor10 0.103