Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 336 - 333A

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 335 Cone Part Number 336 Cup Part Number 333A Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 1 5/8 in D - Cup Outer Diameter 3.1486 in B - Cone Width 0.8820 in C - Cup Width 0.8268 in T - Bearing Width 0.8268 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.03 in r - Cup Backface "To Clear" Radius2 0.030 in da - Cone Frontface Backing Diameter 1.81 in db - Cone Backface Backing Diameter 1.85 in Da - Cup Frontface Backing Diameter 3.03 in Db - Cup Backface Backing Diameter 2.87 in Ab - Cage-Cone Frontface Clearance 0.07 in Aa - Cage-Cone Backface Clearance 0 in a - Effective Center Location3 -0.25 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 5490 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 21200 lbf C0 - Static Radial Rating 18700 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 2570 lbf Factors K - Factor7 2.14 e - ISO Factor8 0.27 Y - ISO Factor9 2.2 G1 - Heat Generation Factor (Roller-Raceway) 26.5 G2 - Heat Generation Factor (Rib-Roller End) 13 Cg - Geometry Factor10 0.0676