Cylindrical Roller Radial Bearings - Four-Row Timken 500RX2345AC2

Описание

Timken’s four-row cylindrical roller bearings are designed for the rigors of daily use in applications where moderate and high speeds, high radial loads, elevated temperatures and debris are constant challenges. Designed with well-balanced cross sections, these bearings provide high-radial-load capacity within the bearing envelope. The radial internal clearance (RIC) for the bearing assembly must be included when ordering either a) the complete assembly or b) with the inner-ring set. It is advisable to order the inner-ring set independent of the outer ring set when the final grind of the inner-ring O.D. is accomplished after mounting on the roll neck. The RX bearings are four-row construction, having two single flangedouter races and rib rings for roller spacing. This allowsfor complete disassembly for inspection. The RX style is usuallypreferred in bearings above 400 mm bore. Both brass and pin-type cages are available in this bearing style.Most inners are two-piece assemblies. Two outer rings with three rib rings. Two inner rings. Four pin-type steel cages. Lubrication grooves and face slots on inner rings. Lubrication grooves and holes on outer rings. Extended inner ring on one side. Specifications Bore d 500 mm Static Load Rating Co 22200000 N Dynamic Load Rating C11 9520000 N Bearing Dimensions O.D. D 670 mm Width B 485 mm Width C 450 mm DUR/DOR F/E 540 mm Type RX-4 Mounting Data Chamfer rsmin 5 mm Chamfer r1smin2 12.5 mm Angle of Chamfer r1smin 0 º Backing Shaft Diameter ds 531 mm Backing Housing Diameter Ds 630 mm Lubrication Data Lubrication Groove g 0 mm Lubrication Hole Diameter h 0 mm Number of Lubrication Holes 0 Sub Assembly Part Numbers Inner-Ring Set 500ARXS2345A Outer-Ring Set 540RXS2345