Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 5356 - 5335

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 5300 Cone Part Number 5356 Cup Part Number 5335 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 1 3/4 in D - Cup Outer Diameter 4.0625 in B - Cone Width 1.7510 in C - Cup Width 1.4375 in T - Bearing Width 1.7188 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.050 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 2.2 in db - Cone Backface Backing Diameter 2.28 in Da - Cup Frontface Backing Diameter 3.85 in Db - Cup Backface Backing Diameter 3.50 in Ab - Cage-Cone Frontface Clearance 0.07 in Aa - Cage-Cone Backface Clearance 0.08 in a - Effective Center Location3 -0.63 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 12400 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 47700 lbf C0 - Static Radial Rating 60100 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 6280 lbf Factors K - Factor7 1.97 e - ISO Factor8 0.3 Y - ISO Factor9 2.02 G1 - Heat Generation Factor (Roller-Raceway) 73.4 G2 - Heat Generation Factor (Rib-Roller End) 15.5 Cg - Geometry Factor10 0.0985