Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 5795 - 5735

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 5700 Cone Part Number 5795 Cup Part Number 5735 Design Unit Inch Cage Material Stamped Steel Related Assembly Number(s) 5795-906A1 Dimensions d - Bore 3.0625 in D - Cup Outer Diameter 5.3438 in B - Cone Width 1.8150 in C - Cup Width 1.3750 in T - Bearing Width 1.7500 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.14 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 3.5 in db - Cone Backface Backing Diameter 3.78 in Da - Cup Frontface Backing Diameter 5.16 in Db - Cup Backface Backing Diameter 4.69 in Ab - Cage-Cone Frontface Clearance 0.08 in Aa - Cage-Cone Backface Clearance 0.2 in a - Effective Center Location3 -0.46 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 17600 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 68100 lbf C0 - Static Radial Rating 85400 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 12300 lbf Factors K - Factor7 1.44 e - ISO Factor8 0.41 Y - ISO Factor9 1.48 G1 - Heat Generation Factor (Roller-Raceway) 144.9 G2 - Heat Generation Factor (Rib-Roller End) 31.6 Cg - Geometry Factor10 0.094