Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 598X - 592A

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 595 Cone Part Number 598X Cup Part Number 592A Design Unit Inch Cage Material Stamped Steel Related Assembly Number(s) 598X-90229 Dimensions d - Bore 3.6250 in D - Cup Outer Diameter 6 in B - Cone Width 1.4300 in C - Cup Width 1.1875 in T - Bearing Width 1.5625 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.14 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 4.09 in db - Cone Backface Backing Diameter 4.21 in Da - Cup Frontface Backing Diameter 5.71 in Db - Cup Backface Backing Diameter 5.31 in Ab - Cage-Cone Frontface Clearance 0.09 in Aa - Cage-Cone Backface Clearance 0.15 in a - Effective Center Location3 -0.1 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 12600 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 48600 lbf C0 - Static Radial Rating 71600 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 9530 lbf Factors K - Factor7 1.32 e - ISO Factor8 0.44 Y - ISO Factor9 1.36 G1 - Heat Generation Factor (Roller-Raceway) 151.4 G2 - Heat Generation Factor (Rib-Roller End) 38.3 Cg - Geometry Factor10 0.142