Model 145 Spring-Loaded Driver Pulleys - Imperial Timken 68514418523

Описание

Two-Side Moveable 1/3 through 1-1/2 HP “A” and “B” Belts Aluminoline variable speed pulleys are designed for the best possible belt alignment with the least amount of overhung load. Flanges are made of a lightweight, corrosion-resistant aluminum, which is hard-coat anodized for long life. The aluminum flanges provide quiet operation with minimum vibration. These pulleys are used with classical “A” and “B” drive belts. Aluminoline pulleys offer maximum service when lubricated through a convenient grease fitting located on the end of the pulley shaft. Belt Selection Aluminoline variable speed pulleys are designed to drive standard “A” and “B” section belts. Due to the intermeshing flange design, it is best to use a wrapped belt or one without cogs. Adjustable Center Drives The typical adjustable center drive consists of the Aluminoline pulley mounted on the motor shaft, a companion sheave on the driven shaft, an adjustable motor base and a belt. Standard “A” and “B” fixed diameter sheaves should be used as driven companion sheaves. Belt alignment will be maintained throughout the speed range because the Aluminoline pulleys are two-side moveable. Due to the minimal bottom contact area of “A” and “B” belts, flat driven sheaves are NOT recommended. Specifications Description 145-1/2-PULLEY Drive Type Adjustable Center - Driver Belt Size A Ratio 2:1 Weight 2.25 lb UPC Number 18523 Dimensional Data Bore Diameter 1/2 in Keyway Size 1/8 x 1/4 in Width 1.380 in Outside Diameter 4.50 in Max. Pitch Diameter (Dimension PD) 4.250 in Min. Pitch Diameter (Dimension PD) 2.100 in Overall Length 4.810 in Cubic inches 97.40250 in³ Performance Data Torque Capacity 18.00 in·lb Motor Power at 1,150 rpm 0.30 hp Motor Power at 1,750 rpm 0.50 hp Features Features Ratings for 1/3 through 1-1/2 HP motors