Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 95500 - 95905

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 95000 Cone Part Number 95500 Cup Part Number 95905 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 5 in D - Cup Outer Diameter 9.0551 in B - Cone Width 2.5 in C - Cup Width 1.9375 in T - Bearing Width 2.5000 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.25 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 5.59 in db - Cone Backface Backing Diameter 6.06 in Da - Cup Frontface Backing Diameter 8.58 in Db - Cup Backface Backing Diameter 8.15 in Ab - Cage-Cone Frontface Clearance 0.19 in Aa - Cage-Cone Backface Clearance 0.22 in a - Effective Center Location3 -0.55 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 36700 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 141000 lbf C0 - Static Radial Rating 209000 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 23200 lbf Factors K - Factor7 1.58 e - ISO Factor8 0.37 Y - ISO Factor9 1.62 G1 - Heat Generation Factor (Roller-Raceway) 453.9 G2 - Heat Generation Factor (Rib-Roller End) 59.4 Cg - Geometry Factor10 0.132