Tapered Roller Bearings - TS (Tapered Single) Imperial Timken 99600 - 99097

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 99000 Cone Part Number 99600 Cup Part Number 99097 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 6 in D - Cup Outer Diameter 9.8415 in B - Cone Width 2.6250 in C - Cup Width 2.1024 in T - Bearing Width 2.6250 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.280 in r - Cup Backface "To Clear" Radius2 0.12 in da - Cone Frontface Backing Diameter 6.68 in db - Cone Backface Backing Diameter 7.13 in Da - Cup Frontface Backing Diameter 9.48 in Db - Cup Backface Backing Diameter 8.90 in Ab - Cage-Cone Frontface Clearance 0.19 in Aa - Cage-Cone Backface Clearance 0.34 in a - Effective Center Location3 -0.48 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 38500 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 148000 lbf C0 - Static Radial Rating 231000 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 26800 lbf Factors K - Factor7 1.43 e - ISO Factor8 0.41 Y - ISO Factor9 1.47 G1 - Heat Generation Factor (Roller-Raceway) 555.5 G2 - Heat Generation Factor (Rib-Roller End) 73.5 Cg - Geometry Factor10 0.146