Tapered Roller Bearings - TS (Tapered Single) Imperial Timken A6062 - A6157A

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series A6000 Cone Part Number A6062 Cup Part Number A6157A Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 5/8 in D - Cup Outer Diameter 1.5741 in B - Cone Width 0.4391 in C - Cup Width 0.3750 in T - Bearing Width 0.4731 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.050 in r - Cup Backface "To Clear" Radius2 0.050 in da - Cone Frontface Backing Diameter 0.81 in db - Cone Backface Backing Diameter 0.87 in Da - Cup Frontface Backing Diameter 1.46 in Db - Cup Backface Backing Diameter 1.34 in Ab - Cage-Cone Frontface Clearance 0.09 in Aa - Cage-Cone Backface Clearance 0.01 in a - Effective Center Location3 -0.06 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 782 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 3020 lbf C0 - Static Radial Rating 2770 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 705 lbf Factors K - Factor7 1.11 e - ISO Factor8 0.53 Y - ISO Factor9 1.14 G1 - Heat Generation Factor (Roller-Raceway) 2.9 G2 - Heat Generation Factor (Rib-Roller End) 5.64 Cg - Geometry Factor10 0.0404