Tapered Roller Bearings - TS (Tapered Single) Imperial Timken H936340 - H936313

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series H936300 Cone Part Number H936340 Cup Part Number H936313 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 6.1250 in D - Cup Outer Diameter 13.2500 in B - Cone Width 3.1250 in C - Cup Width 2.1250 in T - Bearing Width 3.3750 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.25 in r - Cup Backface "To Clear" Radius2 0.250 in da - Cone Frontface Backing Diameter 7.58 in db - Cone Backface Backing Diameter 8.23 in Da - Cup Frontface Backing Diameter 12.26 in Db - Cup Backface Backing Diameter 11.22 in Ab - Cage-Cone Frontface Clearance 0.41 in Aa - Cage-Cone Backface Clearance 0.67 in a - Effective Center Location3 0.66 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 71600 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 276000 lbf C0 - Static Radial Rating 316000 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 99200 lbf Factors K - Factor7 0.72 e - ISO Factor8 0.81 Y - ISO Factor9 0.74 G1 - Heat Generation Factor (Roller-Raceway) 638 G2 - Heat Generation Factor (Rib-Roller End) 69.1 Cg - Geometry Factor10 0.148