Tapered Roller Bearings - TS (Tapered Single) Imperial Timken HM133436 - HM133416

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series HM133400 Cone Part Number HM133436 Cup Part Number HM133416 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 5.9042 in D - Cup Outer Diameter 9.9375 in B - Cone Width 2.7500 in C - Cup Width 2.0625 in T - Bearing Width 2.5000 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.12 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 6.54 in db - Cone Backface Backing Diameter 6.65 in Da - Cup Frontface Backing Diameter 9.21 in Db - Cup Backface Backing Diameter 9.06 in Ab - Cage-Cone Frontface Clearance 0.07 in Aa - Cage-Cone Backface Clearance 0.06 in a - Effective Center Location3 -0.68 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 35000 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 135000 lbf C0 - Static Radial Rating 233000 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 15800 lbf Factors K - Factor7 2.21 e - ISO Factor8 0.26 Y - ISO Factor9 2.27 G1 - Heat Generation Factor (Roller-Raceway) 668.6 G2 - Heat Generation Factor (Rib-Roller End) 103.2 Cg - Geometry Factor10 0.134