Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial Timken HM89446 - HM89410-B

Описание

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings. Specifications Series HM89400 Cone Part Number HM89446 Cup Part Number HM89410-B Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 1 3/8 in D - Cup Outer Diameter 3 in D1 - Flange Outer Diameter 3.1836 in B - Cone Width 1.1250 in C - Cup Width 0.9063 in C1 - Cup Flange Width 0.1875 in T1 - Bearing Width to Flange 0.4375 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.14 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 1.75 in db - Cone Backface Backing Diameter 2.2 in Da - Cup Frontface Backing Diameter 2.99 in Ab - Cage-Cone Frontface Clearance 0.08 in Aa - Cage-Cone Backface Clearance 0.06 in a - Effective Center Location3 -0.22 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 6440 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 24800 lbf C0 - Static Radial Rating 26700 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 6020 lbf Factors K - Factor7 1.07 e - ISO Factor8 0.55 Y - ISO Factor9 1.1 G1 - Heat Generation Factor (Roller-Raceway) 28.9 G2 - Heat Generation Factor (Rib-Roller End) 13.1 Cg - Geometry Factor10 0.0883