Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric Timken JP13049 - JP13010-B

Описание

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings. Specifications Series JP13000 Cone Part Number JP13049 Cup Part Number JP13010-B Design Unit Metric Cage Material Stamped Steel Dimensions d - Bore 130 mm D - Cup Outer Diameter 185 mm D1 - Flange Outer Diameter 192.000 mm B - Cone Width 27.000 mm C - Cup Width 21.000 mm C1 - Cup Flange Width 5.000 mm T1 - Bearing Width to Flange 13.000 mm Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 3.050 mm r - Cup Backface "To Clear" Radius2 3 mm da - Cone Frontface Backing Diameter 137 mm db - Cone Backface Backing Diameter 143 mm Da - Cup Frontface Backing Diameter 188.21 mm Ab - Cage-Cone Frontface Clearance 4.8 mm Aa - Cage-Cone Backface Clearance 1.5 mm a - Effective Center Location3 8.9 mm Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 50800 N C1 - Dynamic Radial Rating (1 million revolutions)5 196000 N C0 - Static Radial Rating 283000 N Ca90- Dynamic Thrust Rating (90 million revolutions)6 41100 N Factors K - Factor7 1.24 e - ISO Factor8 0.47 Y - ISO Factor9 1.27 G1 - Heat Generation Factor (Roller-Raceway) 192 G2 - Heat Generation Factor (Rib-Roller End) 60.3 Cg - Geometry Factor10 0.106