Tapered Roller Bearings - TS (Tapered Single) Imperial Timken LM361649A - LM361610

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series LM361600 Cone Part Number LM361649A Cup Part Number LM361610 Design Unit Inch Cage Material Stamped Steel Related Assembly Number(s) LM361649A-902A3 Dimensions d - Bore 13.5100 in D - Cup Outer Diameter 17.7500 in B - Cone Width 2.6250 in C - Cup Width 2.0625 in T - Bearing Width 2.6250 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.330 in r - Cup Backface "To Clear" Radius2 0.140 in da - Cone Frontface Backing Diameter 14.29 in db - Cone Backface Backing Diameter 14.69 in Da - Cup Frontface Backing Diameter 17.32 in Db - Cup Backface Backing Diameter 16.73 in Ab - Cage-Cone Frontface Clearance 0.25 in Aa - Cage-Cone Backface Clearance 0.14 in a - Effective Center Location3 0.35 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 65000 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 251000 lbf C0 - Static Radial Rating 497000 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 39200 lbf Factors K - Factor7 1.66 e - ISO Factor8 0.35 Y - ISO Factor9 1.7 G1 - Heat Generation Factor (Roller-Raceway) 2732.7 G2 - Heat Generation Factor (Rib-Roller End) 432.9 Cg - Geometry Factor10 0.183