Tapered Roller Bearings - TS (Tapered Single) Imperial Timken LM961548 - LM961510

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series LM961500 Cone Part Number LM961548 Cup Part Number LM961510 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 13.5000 in D - Cup Outer Diameter 17.9960 in B - Cone Width 2.5 in C - Cup Width 1.8125 in T - Bearing Width 2.6250 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.13 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 14.29 in db - Cone Backface Backing Diameter 14.45 in Da - Cup Frontface Backing Diameter 17.46 in Db - Cup Backface Backing Diameter 16.65 in Ab - Cage-Cone Frontface Clearance 0.25 in Aa - Cage-Cone Backface Clearance 0.45 in a - Effective Center Location3 2.22 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 48000 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 185000 lbf C0 - Static Radial Rating 436000 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 58500 lbf Factors K - Factor7 0.82 e - ISO Factor8 0.71 Y - ISO Factor9 0.84 G1 - Heat Generation Factor (Roller-Raceway) 2281.5 G2 - Heat Generation Factor (Rib-Roller End) 300.4 Cg - Geometry Factor10 0.215