Tapered Roller Bearings - TS (Tapered Single) Imperial Timken M241542 - M241510

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series M241500 Cone Part Number M241542 Cup Part Number M241510 Design Unit Inch Cage Material Stamped Steel Dimensions d - Bore 7.875 in D - Cup Outer Diameter 11.5000 in B - Cone Width 2.4375 in C - Cup Width 1.8125 in T - Bearing Width 2.2813 in Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 0.25 in r - Cup Backface "To Clear" Radius2 0.130 in da - Cone Frontface Backing Diameter 8.62 in db - Cone Backface Backing Diameter 8.86 in Da - Cup Frontface Backing Diameter 11.02 in Db - Cup Backface Backing Diameter 10.71 in Ab - Cage-Cone Frontface Clearance 0.03 in Aa - Cage-Cone Backface Clearance 0.12 in a - Effective Center Location3 -0.19 in Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 32600 lbf C1 - Dynamic Radial Rating (1 million revolutions)5 126000 lbf C0 - Static Radial Rating 238000 lbf Ca90- Dynamic Thrust Rating (90 million revolutions)6 18600 lbf Factors K - Factor7 1.76 e - ISO Factor8 0.33 Y - ISO Factor9 1.8 G1 - Heat Generation Factor (Roller-Raceway) 890.6 G2 - Heat Generation Factor (Rib-Roller End) 119.8 Cg - Geometry Factor10 0.125