TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings Timken 68514462267

Описание

Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal TF Type flanges allow for mounting the bushing on the front (hub) side of the flange TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types. Specifications Description 7TF-FLNG-TAPER-BSW-THREAD Coupling Size 7TF Type Coupling Flange Material Cast Iron Weight 17.00 lb Color Gray Bore Type Bored to Accept 1108 Taper Lock Bushing Mount Type Front Bushing Required 1215/1210 Coupling Type S-Flex UNC Flange UPC Number 62267 Dimensional Data Keyway Size (W x D) No Keyway Hub Diameter 2.810 in Dimension L 1.840 in Outside Diameter 4.620 in Overall Length 3.940 in Max. Bore (Dimensions ID1/ID2) 1.250 in Dimension FL 0.780 in Dimension G 1 in Dimension P 0.690 in Dimension R 1.310 in Bushing Screw Size 3/8-16 Cubic inches 39.27370 in³ Performance Data Nominal Torque (with EPDM Sleeve) 725 in·lb Max. Speed 5250.00 rpm Torsional Stiffness 2769.00 in·lb/rad Rated HP at 100 rpm for 1.0 Service Factor 1.20 hp Rated HP at 1,200 rpm 14.00 hp Rated HP at 1,800 rpm 21.00 hp Rated HP at 3,600 rpm 41.00 hp Notes Notes Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.