TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings Timken 68514462273

Описание

Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal TF Type flanges allow for mounting the bushing on the front (hub) side of the flange TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types. Specifications Description 8TF-FLNG-TAPER STD UNC THREAD Coupling Size 8TF Type Coupling Flange Material Cast Iron Weight 17.00 lb Color Gray Bore Type Bored to Accept 1215/1210 Taper Lock Bushing Mount Type Front Bushing Required 1615/1610 Coupling Type S-Flex UNC Flange UPC Number 62273 Dimensional Data Keyway Size (W x D) No Keyway Hub Diameter 3.250 in Dimension L 1.940 in Outside Diameter 5.450 in Overall Length 5.00 in Max. Bore (Dimensions ID1/ID2) 1.620 in Dimension FL 0.910 in Dimension G 1.130 in Dimension P 1.030 in Dimension R 1.500 in Bushing Screw Size 3/8-16 Cubic inches 57.62285 in³ Performance Data Nominal Torque (with EPDM Sleeve) 1135 in·lb Max. Speed 4500 rpm Torsional Stiffness 4335.00 in·lb/rad Rated HP at 100 rpm for 1.0 Service Factor 1.80 hp Rated HP at 1,200 rpm 22.00 hp Rated HP at 1,800 rpm 32.00 hp Rated HP at 3,600 rpm 65.00 hp Notes Notes Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.