TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings Timken 68514462277

Описание

Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal TF Type flanges allow for mounting the bushing on the front (hub) side of the flange TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types. Specifications Description 9TF-FLNG-TAPER STD UNC THREAD Coupling Size 9TF Type Coupling Flange Material Cast Iron Weight 17.00 lb Color Gray Bore Type Bored to Accept 1615/1610 Taper Lock Bushing Mount Type Front Bushing Required 2012 Coupling Type S-Flex UNC Flange UPC Number 62277 Dimensional Data Keyway Size (W x D) No Keyway Hub Diameter 4.130 in Dimension L 2.280 in Outside Diameter 6.350 in Overall Length 6.000 in Max. Bore (Dimensions ID1/ID2) 2.000 in Dimension FL 1.030 in Dimension G 1.440 in Dimension P 1.250 in Dimension R 1.750 in Bushing Screw Size 7/16-14 Cubic inches 91.93530 in³ Performance Data Nominal Torque (with EPDM Sleeve) 1800 in·lb Max. Speed 3750.00 rpm Torsional Stiffness 6875.00 in·lb/rad Rated HP at 100 rpm for 1.0 Service Factor 2.90 hp Rated HP at 1,200 rpm 34.00 hp Rated HP at 1,800 rpm 51.00 hp Rated HP at 3,600 rpm 103.00 hp Notes Notes Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.