TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings Timken 68514462283

Описание

Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal TF Type flanges allow for mounting the bushing on the front (hub) side of the flange TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types. Specifications Description 11TF-FLNG-TAPER-BSW-THREAD Coupling Size 11TF Type Coupling Flange Material Cast Iron Weight 17.00 lb Color Gray Bore Type Bored to Accept 2525 Taper Lock Bushing Mount Type Front Bushing Required 2517 Coupling Type S-Flex UNC Flange UPC Number 62283 Dimensional Data Keyway Size (W x D) No Keyway Hub Diameter 5.630 in Dimension L 3.060 in Outside Diameter 8.630 in Overall Length 8.000 in Max. Bore (Dimensions ID1/ID2) 2.500 in Dimension FL 1.500 in Dimension G 1.880 in Dimension P 1.560 in Dimension R 2.380 in Bushing Screw Size 1/2-13 Cubic inches 227.89931 in³ Performance Data Nominal Torque (with EPDM Sleeve) 4530 in·lb Max. Speed 3600.00 rpm Torsional Stiffness 17300.00 in·lb/rad Rated HP at 100 rpm for 1.0 Service Factor 7.20 hp Rated HP at 1,200 rpm 86.00 hp Rated HP at 1,800 rpm 129.00 hp Rated HP at 3,600 rpm 259.00 hp Notes Notes Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.