Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series Timken SDAF 22626 4-3/8

Описание

Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals. To order pillow block housing only, use the number listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring. Assembly and pillow blocks as described on this page constitute fixed units. To order float units, specify part number plus suffix "Float" or "FL". If one end closed assembly is required, specify “CL” in assembly number when ordering. Assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22515). When ordering non-standard pillow block assemblies specify the shaft size. Specifications Bearing Number 22326K Diameter S-1 4.3750 in A 6-11/16 in B 22.0 in C 8.25 in D 2.5 in E Max. 19.25 in E Min. 17.375 in F 5.0 in H1 13.6875 in Oil Level K 2.625 in L2 8.75 in Y 2.4219 in No. of Base Bolts Required 4 Size of Base Bolts Required 1 1/8 Bolt Hole Length 2.0625 in Bolt Hole Width 1.125 in Adapter Assembly Number3 SNW-126 x 4-3/8 Housing Only4 SDAF626 x 4-3/8 Stabilizing Ring 1 Req'd5 SR-0-26 Triple Seal Req'd LOR 116 Full Timken Part Number SDAF226264-3/8 Basic Load Ratings C0 - Static Radial Rating 318000 lbf C1(2) - Dynamic Radial Rating (Two-Rows) 281000 lbf Factors e - ISO Factor6 0.32 Y0 - ISO Factor7 2.06 Y1 - ISO Factor8 2.11 Y2 - ISO Factor9 3.14 Reference Thermal Speed Rating (Grease) 1800 rpm Reference Thermal Speed Rating (Oil)10 2000 rpm Cg - Geometry Factor11 0.0874