Inch Tapered Bore Mounting Pillow Block SDAF231K and SDAF232K Series Timken SDAF 23152K 9-1/2

Описание

Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals. To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring. Assembly and pillow blocks described on this page constitute fixed units. To order float units, specify part number plus suffix "Float" or "FL". If one end closed assembly is required, specify “CL” in assembly number when ordering. All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha prefix (e.g., SDAFS 23152K). When ordering non-standard pillow block assemblies specify the shaft size. Specifications Bearing Number 23152K Diameter S-1 9 1/2 in A 10.25 in B 35 in C 13.125 in D 3.75 in E Max. 30.5 in E Min. 29 in F 8.75 in H 20.875 in L 13.75 in Bolt Hole Length 2.375 in Bolt Hole Width 1.625 in Adapter Assembly Number1 SNP-3152 x 9-1/2 Housing Only2 SDAF3152K x 9-1/2 Stabilizing Ring 1 Req'd3 A5679 Triple Seal Req'd ER 842 Full Timken Part Number SDAF23152K9-1/2 Basic Load Ratings C0 - Static Radial Rating 885000 lbf C1(2) - Dynamic Radial Rating (Two-Rows) 603000 lbf Factors e - ISO Factor4 0.3 Y0 - ISO Factor5 2.18 Y1 - ISO Factor6 2.23 Y2 - ISO Factor7 3.31 Reference Thermal Speed Rating (Grease) 830 rpm Reference Thermal Speed Rating (Oil)8 930 rpm Cg - Geometry Factor9 0.1162