Inch Tapered Bore Mounting Pillow Block SDAF231K and SDAF232K Series Timken SDAF 23172K 13-7/16

Описание

Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals. To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring. Assembly and pillow blocks described on this page constitute fixed units. To order float units, specify part number plus suffix "Float" or "FL". If one end closed assembly is required, specify “CL” in assembly number when ordering. All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha prefix (e.g., SDAFS 23152K). When ordering non-standard pillow block assemblies specify the shaft size. Specifications Bearing Number 23172K Diameter S-1 13.4375 in A 14.5 in B 46 in C 17.125 in D 5.25 in E Max. 40.75 in E Min. 39.25 in F 11 in H 28.875 in L 17.75 in Bolt Hole Length 2.75 in Bolt Hole Width 2 in Adapter Assembly Number1 SNP-3172 x 13-7/16 Housing Only2 SDAF3172K x 13-7/16 Stabilizing Ring 1 Req'd3 A8974 Triple Seal Req'd ER 872 Full Timken Part Number SDAF23172K13-7/16 Basic Load Ratings C0 - Static Radial Rating 1640000 lbf C1(2) - Dynamic Radial Rating (Two-Rows) 1050000 lbf Factors e - ISO Factor4 0.29 Y0 - ISO Factor5 2.24 Y1 - ISO Factor6 2.29 Y2 - ISO Factor7 3.42 Reference Thermal Speed Rating (Grease) 530 rpm Reference Thermal Speed Rating (Oil)8 590 rpm Cg - Geometry Factor9 0.1427