Tapered Roller Bearings - TS (Tapered Single) Metric Timken X32032 - Y32032

Описание

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. Specifications Series 32032 Cone Part Number X32032 Cup Part Number Y32032 Design Unit Metric Cage Material Stamped Steel Related Assembly Number(s) 32032-90KA2 Dimensions d - Bore 160 mm D - Cup Outer Diameter 240 mm B - Cone Width 51 mm C - Cup Width 38 mm T - Bearing Width 51 mm Abutment and Fillet Dimensions R - Cone Backface "To Clear" Radius1 3.050 mm r - Cup Backface "To Clear" Radius2 2.54 mm da - Cone Frontface Backing Diameter 169.9 mm db - Cone Backface Backing Diameter 181.1 mm Da - Cup Frontface Backing Diameter 231.39 mm Db - Cup Backface Backing Diameter 219.96 mm Ab - Cage-Cone Frontface Clearance 4.6 mm Aa - Cage-Cone Backface Clearance 4.1 mm a - Effective Center Location3 1.5 mm Basic Load Ratings C90 - Dynamic Radial Rating (90 million revolutions)4 134000 N C1 - Dynamic Radial Rating (1 million revolutions)5 516000 N C0 - Static Radial Rating 801000 N Ca90- Dynamic Thrust Rating (90 million revolutions)6 105000 N Factors K - Factor7 1.27 e - ISO Factor8 0.46 Y - ISO Factor9 1.31 G1 - Heat Generation Factor (Roller-Raceway) 465.4 G2 - Heat Generation Factor (Rib-Roller End) 85.9 Cg - Geometry Factor10 0.143